Mould Release > METAFORM


P R O D U C T ST Y P E
　■ MOLD RELEASE AGENT　●GENERAL　　●HEAT RESISTANT
　■ ANTI RUST AGENT　●SHORT TERM　　●MIDDLE TERM　　●LONG TERM
　■ CLEANING AGENT　●GENERAL　　●STORONG　　●GAS & TAR REMOVER
　■ LUBRICANT AGENT　●DRY　　●OIL　　●GREASE　　●LIQUID
　■ SURFACE TREATMENT　●SURFACE TREATMENT　　●ANTI STATIC　　●COATING
　■ OTHER / OEM ODM　●OTHER　　●OEM ODM

This product is mold release agent with paintable type. It has no effect for next process like painting, printing, welding, plating, stamping, etc.. It has also no effect for plastic parts and no problem concerned to solvent crack, etc..    

<Liquid types also available>

Grade Feature Ingredients Regulation
101

Release for generally plastic.

Oil & Fats additives, Other additives, Solvents, LPG

  
307

Little oil dirty and few negative effects to the plastic.

 Oil & Fats additives, Synthetic oil, Solvents, LPG  
107

Less stick and bleeding.
Finish of the products is good.

 Oil & Fats additives, Synthetic oil, Solvents, LPG  

Package：420ml×24cans / box　　※The grade name is printed on can or seal is affixed.

With silicone as main components, having excellent release ability. There are various types that changed the formulation of silicone. ※Can not be used in the products which need secondary processing.

<Liquid types also available>

Grade Feature Ingredients Regulation
CL

It excels in mold release characteristic and durability.

High viscosity silicone oil, Solvents, LPG

  
CL-1

Solvents free. Environment-friendly product.

Low viscosity silicone oil, LPG

  
CL-2

Products and mold are hard to get dirty.

Medium viscosity silicone oil, Solvents, LPG

  

Package：420ml×24cans / box　　※The grade name is printed on can or seal is affixed.

It is the unique release agents which contained special ingredients.

<Liquid types also available>

Grade Feature Ingredients Regulation
BS

Less sticky.
Finish of the products is good.
Secondary processing is possible.

Modified silicone oil, Solvents, LPG

  
MC-5

It excels in mold release characteristic. Secondary processing is possible if small amount application.

Modified silicone oil, Solvents, LPG

  
ME

No sticky.
Finish of the products is good.
It is suitable for use of transparent plastics.

Metal soap, Solvents, LPG

  

Package：420ml×24cans / box　　※The grade name is printed on can or seal is affixed.

Fluorine mold release has it forms a very thin dry coating film and releases it, the transfer of the release agent to the products is small and it is excellent in sustainability. Excellent in heat resistance, it can also be used as mold release agent for rubbers molding and thermosetting molding.     <Liquid types also available>

Grade Feature Ingredients Regulation
FB

Non-silicone.
Representative product of fluorine release agent.

Special fluorine, Solvents, Alcohol, LPG

  
FX

Non-silicone.
Finish of the products is good

Special fluorine, Solvents, Alcohol, LPG

  
FT

Modified silicone component.
Finish of the products is good.

Modified silicone, Fluorine compound, Solvent, LPG

  

FZ

Silicone component.
Finish of the products is good.

Modified silicone, Fluorine compound, Solvent, LPG

  

Package：420ml×24cans / box　　※The grade name is printed on can or seal is affixed.

It is mold release agents for rubbers molding and thermosetting molding use of the fluorine resin and silicone resin.

It is very excellent in durability and heat resistance.

Grade Feature Ingredients Regulation
R100

Fluorine coating formation.
Finish of the products is good. Few dirty to mold.
Secondary processing is possible.

Fluorine resin,
Solvents, LPG

  
R210

Fluorine coating formation.
It excels in mold release characteristic.

Fluorine resin,
Modified silicone,
Solvents, LPG

  
R420

Bake-on silicone type.
Bake-on is possible at 120℃ｘ5minutes.
*Patented

Silicone resin,
Modified silicone,
Solvents, LPG

  

Package：420ml×24cans / box　　※The grade name is printed on can or seal is affixed.