| |
|
|
■LIGHT
STOPPER |
The
gasified regin adhering to the surface of the metal mold,
are removed easily. |
|
【Instruction】
1. Please spray it on the entire
adhesive. You leave until the agent
infiltrating enough (4 or 5 minutes) and the dust comes to the surface.
2. When the adhesive is few,
you could remove it by only several shots.
3. When the adhesive is strong,
please scrape
it with the soft brush and cloth.
4. To the cruel dirt and embossed
surface or something,
please wash out with our Metal mold Cleaner after Light stopper
being used.
This doesn't
contain chlorinated
solvents.
【Net 420ml, 12cans in a box, 48cans in a carton】 |
| |
|
|
■GAS
TRICK |
This
agent also removes effectively nonflammable,
super-heatproof resin and pigments.
This is the type that the smell and toxicity are extremely few.
|
|
【Instruction】
1. Please spray it on the entire
adhesive. You leave until the agent infiltrating enough (4 or 5
minutes) and the dust comes to the surface.
2. When the adhesive is few,
you could remove it by only several shots.
3. When the adhesive is strong,
please scrape it with the soft brush and cloth.
4. To the cruel dirt and embossed
surface or something, please wash out with our Metal mold Cleaner
after Gas trick being used.
This
doesn't contain
chlorinated solvents.
This is an economical can in 480ml.
【Net 480ml, 12cans in a box, 48cans
in a carton】 |
| |
|
|
■MOULD
FRESH |
This
agent peels the adhesive off.
It is a type safe as for the human body and the metal. |
|
The suitable resin is not
limited and it shows the effect to the polyacetal , nylon, ABS nonflammable
material, phenol, vinyl chloride and so on that used to be difficult,
as the action peeling the adhesive, as it peels the adhesive from
the metal. Because it dosen`t contain the acid at all, the metal
is not violated. There is not a strong smell and so it is safe in
work.
【Instruction】
1. Please adhesive the proper
quantity directly on the adhesion thing of the metal.
2. After spread out, please
rub lightly with a soft brush and the cloth.
|
【Comparison
of the Performance】
|
Old
type of removal agent |
Mold
fresh |
| Element |
Organic solvent |
Surface-active
agent, Grinding agemt,
Water |
Influence
on work
environment |
Preventive measures
to the poisoning(attention to fire in case of flammable solvent) |
Especially,
none |
| Performance
(Execution example) |
--- |
POM,
which used to be difficult is removed. |
| Method
of removing and cleaning |
Infiltration, dissolution,swelling |
Infiltration,
grinding, flaking off |
| Influence
to the human body |
Inhalation of steam
is avoided |
Especially,
None |
| Influence
to environment |
Need disposal on
running down waste pipe etc. Pay attention to the diffusion
to the atmosphere. |
Even
if flushes out, especially unquestionable Not diffuse to the
atmosphere |
| Attention
to fire |
Most is necessary |
Unnecessary |
|
This
doesn't contain
chlorinated solvents.
Outside the preventive regulation.
【Net 100ml】 |
 |
|
